I. Definition and Geometric Structure of Elliptical Heads

An elliptical head (also referred to as an ellipsoidal head) is one of the most widely used dish end closures for industrial pressure vessels and pressurized pipelines. It is a continuous composite structure consisting of two distinct sections: a revolving ellipsoidal shell and a cylindrical straight flange.

Function of the Straight Flange: The cylindrical straight flange is incorporated to prevent the direct superposition of welding thermal stress and edge discontinuity stress at the circumferential joint where the head meets the vessel shell. This significantly improves the stress distribution in the weld zone.
Standard Elliptical Head: In engineering design and relevant national standards (such as GB/T 25198), it is customary to define an elliptical head as a “standard elliptical head” when the ratio of the major axis (internal diameter $D_i$ ) to the minor axis (internal depth $h_h$ ) of the revolving ellipsoidal profile equals 2.0 .

II. Industrial Functions and Core Applications

Elliptical heads are primarily utilized to achieve boundary isolation and pressure-retaining closure. Their core applications fall into the following two categories:

Pipeline Terminations (End Cap Function): When an industrial pipeline reaches its designated end and no further extensions are planned, an elliptical head is welded directly to the pipe termination as a permanent closure.
Pressure Vessel End Closures: In typical specialized pressure equipment—such as storage tanks, reactors, heat exchangers, and separators—a standard configuration utilizes a central cylindrical shell capped by an elliptical head on each end (either top/bottom or left/right). Together, these components form a highly sealed, pressure-resistant integrity.

III. In-Depth Comparison of Technical Pros and Cons

In pressure vessel engineering, selecting a head type involves balancing performance and cost among hemispherical, elliptical, and torispherical profiles. The mechanical and manufacturing characteristics of elliptical heads represent a sweet spot between the other two options:

Head Type Performance Comparison

Head Profile	Mechanical Stress Performance	Profile Depth	Manufacturing Difficulty & Tooling Requirements
Hemispherical Head	Strongest (Highest pressure rating for a given wall thickness)	Deepest	Extremely difficult (Demands high-capacity pressing equipment and massive tonnage dies)
Elliptical Head	Excellent (Second only to hemispherical heads)	Moderate	Moderate (Easier than hemispherical, more difficult than torispherical)
Torispherical Head	Inferior (Stress concentration occurs at geometric discontinuities)	Shallowest	Easy (Convenient to process with low machine-tonnage requirements)

1. Main Advantages

Outstanding Mechanical Performance: The radius of curvature across an elliptical head transitions smoothly and continuously. Consequently, the stress distribution generated by internal pressure is far more uniform than that of a torispherical head. Under identical design pressures, its required wall thickness is significantly lower.
High Cost-Effectiveness: Although its pressure-retaining capability is slightly inferior to that of a perfect hemispherical head, its reduced depth significantly lowers both the difficulty of hot/cold press forming and the cost of die fabrication. It perfectly balances structural safety with manufacturing economy, leading to its exceptionally high adoption rate in modern manufacturing.

2. Main Disadvantages

Higher Forming Difficulty than Torispherical Heads: Compared to shallow torispherical heads, elliptical heads require a deeper draw. During deep drawing or spinning, the blank’s edge areas are prone to thinning or wrinkling. This imposes more stringent technical requirements on processing equipment, die precision, and operation techniques.

IV. Full Lifecycle Maintenance and Manufacturing Specifications

To prevent stress corrosion, mechanical damage, localized stress concentrations, or material degradation during manufacturing, assembly welding, testing, and long-term operation, the following professional maintenance and compliance specifications must be strictly enforced:

1. Strict Control of Testing and Cleaning Media

Chloride Ion Regulation: When the system undergoes hydrostatic testing, the water quality must be verified beforehand; the chloride ion content must not exceed 25 mg/L. Once the test is complete, the drain valve must be opened immediately to discharge the water. The interior should then be promptly dried using compressed air or hot air to prevent chloride accumulation, which can trigger pitting corrosion or stress corrosion cracking (SCC) in stainless steel.
Prohibition of Reducing Acids: For surface cleaning or pickling of stainless steel elliptical heads, the use of reducing acids, such as hydrochloric acid, is strictly prohibited. Reducing acids instantly destroy the chromium-rich, dense passive film on the stainless steel surface. Instead, dedicated oxidizing pickling pastes or cleaning solutions containing nitric-hydrofluoric acid must be used.

2. Fabrication Assembly Welding and Surface Protection

Removal of Welding Contaminants: After completing the butt-welding between the elliptical head and the shell, all slag, spatter, grease, and other contaminants on the weld seam, heat-affected zone (HAZ), and surrounding areas must be cleared immediately. Following successful visual inspection and non-destructive testing (such as PT/RT), a comprehensive surface pickling and passivation treatment should be performed to restore the material’s inherent corrosion resistance.
Prevention of Mechanical Scratches and Dents: Extra care must be taken to protect the external surfaces and weld bevels during workshop transfer, storage, and hoisting. Physical gouges or scratches caused by impacts can easily act as high stress-concentration sites during operation.
Carbon Steel Isolation (Prevention of Iron Contamination): If the head is fabricated from stainless steel or specialized alloys, direct contact with carbon steel during storage and processing must be prevented. Physical barriers, such as rubber mats or wooden boards, should be used for isolation. Embedded iron particles can form micro-galvanic cells in humid environments, inducing localized electrochemical corrosion.

3. Stress Control and Structural Optimization

Control of Manufacturing and Restraint Stresses: The structural design of the elliptical head and the layout of nozzle openings should be scientifically optimized to prevent excessive localized restraint stress.
Prohibition of Forced Alignment and Welding: During the fit-up of the shell and the head, joint mismatch (offset) and gaps must be strictly controlled. Forced assembly welding using excessive external forces, heavy-duty pull-up devices, or sledgehammer impacts is strictly forbidden. This minimizes residual assembly stresses and prevents premature equipment failure caused by high residual stresses during operation.

Note: The size and material of the elliptical heads can be customized to meet your specific requirements.

Ellipsoidal Head Factory

High-Performance Ellipsoidal Head(Elliptical Dish Ends)